duram duramax
 
 
textured coatings waterproofing antislip

Material Safety Data Sheet

WB Primer

Water-Based Primer

Not Classified as hazardous according to the critera of Worksafe Australia.

 

Identification

Product Name: WB Primer
Other Names: Duram WB Primer.
U.N. Number: N/A
Class: N/A
Hazchem Code: N/A
Poison Schedule: N/A Not Scheduled.
Pack Sizes: 1 ltr, 4 ltrs & 15 ltr Pails.
   

Physical Description

Appearance: Milky Coloured Liquid, Practically odourless.
Boiling Point: +-100% (Relates to water)
Vapour Pressure: N/A
Percent Volatiles: +-60% (Water)
Specific Gravity: +-1.0
Flash Point: N/A Water based.
Flammability: N/A Water based.
Water Solubility: Miscible.

Ingredients

Chemical CAS No. Proportion
Water. N/A >30%
Latex Polymer. N/A >30%
Bactericide. N/A >5%
     

Uses:

Duram WB Primer should be used to seal and prime all porous substrates over which a water based membrane or coating will be applied.

Health Warning Information

Health Effects

Swallowed: Irritating and nauseating. Single dose oral toxicity is regarded as low.

Eye's: Irritating, corneal damage is unlikely.

Skin Contact: Minor irritation, prolonged contact should be avoided.

Inhaled: Can be irritating, adverse effects not anticipated.

First Aid

Inhalation: Unlikely due to the nature of the product. Move person to fresh air. If breathing stops, apply artificial respiration. Seek immediate medical advise.

Eye: Flush eye's with clean water, holding open to ensure product is removed from inner lid. Seek medical help if symptoms persist.

Ingestion: Give milk or water to drink, vomiting can be induced if the patient is conscious.

Advice to Doctor

Treat Symptomatically.

Precautions in Use

Low risk. Observe normal industrial hygiene and precautions.

Exposure Limits

N/A

Ventilation

Good ventilation is recommended. If person is affected by volatiles or smell, (low odour) then remove to fresh air.

Personal Protection

Face mask, goggles and gloves (against splashes) are recommended.
If spraying in confined areas or in misty conditions use an approved mist respirator.

Safe Handling Information

Storage and Transport

Storage: Store undercover in a cool dry place. Do not allow the product to freeze.
Suitable containers: Plastic pails as recommended by manufacturer.
Check container is labeled and not damaged.

Spills and Disposal

Spills: Apply sand to spills and dispose of in accordance with the local council regulation.

Disposal: Can be eliminated from sewage / effluent by chemical flocculation.

Fire / Explosion Hazard

Product is water based no direct hazard.
Issued: 1 May 2007 | Valid to: 31 May 2012

Conditions of Use and Disclaimer

The information contained in this Material Data Sheet is given in good faith based upon our current knowledge and does not imply warranty, express or implied. The information is provided and the product is sold on the basis that the product is used for its intended purpose and is used in a proper workmanlike manner in accordance with the instructions of the Product Data Sheet in suitable and safe working conditions. Under no circumstances will the Company be liable for loss, consequential or otherwise, arising from the use of the product.

DURAM INDUSTRIES (PTY) LTD ACN 002 968 809 ABN 77 002 968 809
The Ultimate in Waterproofing & Protective Coating Technology

Duram Offices:
NEW SOUTH WALES: 51 Prince William Drive, Seven Hills, NSW 2147

 Tel (02) 9624 4077  Fax: (02) 9624 4079

QUEENSLAND: Unit4, 29 Collinsvale St Rocklea, QLD 4106

Tel (07) 3255 6478  Fax: (07) 3255 6258

NEW ZEALAND: Unit 3, 65 Elizabeth Knox Place, Mount Wellington, Auckland

Tel (09)   527 0551  Fax:  (09) 527 0552