 |
Material Safety Data Sheet
Duram 195
Liquid Polyurethane Waterproofing Membrane |
None.
Identification |
| Product Name: |
Duram 195 |
| Other Names: |
195 |
| U.N. Number: |
1263 |
| Class: |
III |
| Hazchem Code: |
3Y |
| Poison Schedule: |
6 |
| Pack Sizes: |
1 Lt, 5Lt & 20Lt pails |
| |
|
|
 |
 |
|
Physical Description |
| Appearance: |
Dark brown to black high viscosity liquid. |
| Boiling Point: |
Approx. 300oC. |
| Vapour Pressure: |
Approx. 6.00 (Xylene). |
| Percent Volatiles: |
> 15% |
| Specific Gravity: |
+/- 1.1 |
| Flash Point: |
28oC (Xylene) |
| Flammability: |
1.1-7.0% (Xylene) |
| Water Solubility: |
Insoluble. Cures slowly on contact with water. |
|
|
|
|
Ingredients |
| Chemical |
CAS No. |
Proportion |
|
| Urethane Polymer
|
N/A |
30-60% |
|
|
| Inert Fillers
|
N/A |
10-30% |
|
|
| Xylene
|
1330-20-7 |
10-30% |
|
|
| Minor ingredients, unspecified water
|
N/A |
< 5.0% |
|
| |
|
|
|
Uses:
Duram 195 is designed to waterproof most applications within the building and construction industry.
EXPOSED AREAS:
Some but not limited to the following.
Roofs, decks, terraces, balconies, podiums and gutters.
TILED OR COVERED AREAS:
Shower recess & wet areas (floors and upturns), decks, balconies, terraces, podiums, retaining walls, planters and lanscaped areas, structural slabs, tanks, pits and water retaining structures. |
Health Warning Information
Health Effects
Swallowed: Ingestion could cause gastric irritation.
Eye: Irrition and burning. Long - term exposure can cause damage.
Skin: Irritation, burning sensation.
Inhaled: Irritation with asthma like symptom. Headache and nausea is possible. It is unlikely that the product would be inhaled due to its viscosity. Inhaled matter is likely to be Xylene.
First Aid
Acute Swallowed: Do not induce vomiting. Give plenty of milk or water to drink. Seek immediate medical advice.
Acute Eye: Flush eye with copious amounts of clean water, holding open the lid to ensure any trapped product may be flushed away.
Acute Skin: Wipe product off skin. Wash skin with soap and water. Apply moisturising cream.
Acute Inhaled: Remove person from exposure. Keep rested ,if breathing has stopped apply artificial respiration immediately and seek immediate medical attention.
Chronic: Except for prolonged skin contact causing sensitivity and alkaline burning, products of this type are not anticipated to cause significant adverse effects.
Advice to Doctor
Swallowed: Do not induce vomiting. Give plenty water to drink and seek immediate medical attention.
Eye: Immediately thoroughly flush eye with clean water, holding open lid to ensure any trapped product maybe flushed away. Seek medical assistance.
Skin: Remove contaminated clothing, wash with soap & water. Do not use solvents to remove material. Apply moisturising cream.
Inhaled: Remove person to fresh air. Keep rested, if breathing has stopped apply artificial respiration immediately and seek immediate medical attention.
Precautions in Use
Treat symptomatically
Exposure Limits
Use in ventilated areas and provide flame proof artificial ventilation if required to maintain concentrations below Xylene Exposure Standard of 350g/m3 (TWA) 655 mg/m3 (STEL) or 100ppm.
Ventilation
Exposure limits TLV (mg) 10.
Personal Protection
Good ventilation is required.The use of solvent resistant gloves, coveralls, safety boots and goggles (against splashes) is recommended. Avoid breathing vapours. Vapours may collect in low lying areas. Respirator type ( AS1716): Use if inhalation risk exists. Keep flame, sparks and any sources of ignition away from uncured product.
Safe Handling Information
Storage and Transport
Store in cool dry area, away from all sources of ignition.
Store in original containers. Keep sealed, labeled and leak free.
Suitable containers: Plain metal cans or pails as recommended by manufacturer.
Class 3 dangerous goods must be declared prior to transportation.
Spills and Disposal
Prevent spills from entering drains and waterways. Clean up spills immediately. Absorb material with sand or other adsorbing material and shovel into suitably labeled containers and dispose of in accordance with local council regulations.
Fire / Explosion Hazard
Containers should be kept cool with water spray to prevent pressure build up. Burning product may produce a dense, toxic, irritating smoke. Heat may cause cans/pails to rupture. Do not allow run off to enter drains and waterways.
Issued: 1 May 2007 | Valid to:
Conditions of Use and Disclaimer
The information contained in this data sheet is given in good faith based upon our knowledge and current information and does not imply warranty. The information is provided and the product sold on the basis that the product is used for its intended use and applied in a proper workman like manner in accordance with the instruction in this data sheet onto suitable and correctly prepared surfaces which shall remain sound, stable, free of structural defects, cracking, spalling concrete cancer, negative pressure, movement or other conditions that may effect the performance of the product. Deviations from application instructions may diminish or negate the performance of the product. Under no circumstances will the Company be liable for any loss, consequential or otherwise, arising from the use of the product. Liability is limited to the replacement of proven faulty product.