 |
Material Safety Data Sheet
Maximesh
Jointing tape - Mesh for reinforcing joints in conjunction with MaxiJoint |
Identification |
| Product Name: |
Maximesh |
| Other Names: |
MAXIMESH |
| U.N. Number: |
N/A |
| Class: |
N/A |
| Hazchem Code: |
N/A |
| Poison Schedule: |
N/A |
| Pack Sizes: |
50mm x 50M, 150mm x 50M and 1M x 50M rolls. |
| |
|
|
 |
 |
|
Physical Description |
| Appearance: |
Off white fibreglass type mesh. |
| Boiling Point: |
N/A |
| Vapour Pressure: |
N/A |
| Percent Volatiles: |
N/A |
| Specific Gravity: |
N/A |
| Flash Point: |
N/A |
| Flammability: |
N/A |
| Water Solubility: |
N/A |
|
|
|
|
Ingredients |
| Chemical |
CAS No. |
Proportion |
| |
|
|
|
Uses:
Used to re-inforce blue board and FC sheeting joints in conjunction with Maxijoint and Maxicrete for our Duramax jointing system. |
Health Warning Information
Health Effects
N/A
First Aid
N/A
Advice to Doctor
N/A
Precautions in Use
If the need to cut the fabric arises, the use of a sharp knife or blade is required.
Adhere to all safety precautions in the use of sharp objects.
The wearing of a suitable mask while cutting the fabric is recommended.
Exposure Limits
N/A
Ventilation
N/A
Personal Protection
If it is necessary to cut the fabric using a sharp knife or blade, usual safety precautions should be followed.
The wearing of a suitable mask is recommended while cutting the fabric.
Safe Handling Information
Storage and Transport
Store in cool, dry area away from extreme conditions.
Usually stored in cartons, which should remain damage free.
Spills and Disposal
N/A
Fire / Explosion Hazard
Will burn on continued contact with flames.
Issued: 1 May 2007 | Valid to:
Conditions of Use and Disclaimer
The information contained in this data sheet is given in good faith based upon our knowledge and current information and does not imply warranty. The information is provided and the product sold on the basis that the product is used for its intended use and applied in a proper workman like manner in accordance with the instruction in this data sheet onto suitable and correctly prepared surfaces which shall remain sound, stable, free of structural defects, cracking, spalling concrete cancer, negative pressure, movement or other conditions that may effect the performance of the product. Deviations from application instructions may diminish or negate the performance of the product. Under no circumstances will the Company be liable for any loss, consequential or otherwise, arising from the use of the product. Liability is limited to the replacement of proven faulty product.